For the purpose of calculating the size of demolition charges, it is important to know the exact position, direction and deviation of the drilled holes.
The Robit M Sense system measures the deviation of the hole using a gyroscope and accelerometer inside the measurement probe. The measurement is performed by lowering the measurement probe into the drilled hole and the measurement data is transmitted to a computer when the module is lifted.
The measurement results are available immediately after measuring. The system also provides a wide range of tools for examining the holes and analysing the field.
Borehole measurement accuracy is affected in certain borehole angles. System azimuth accuracy decreases in red zones. Inclination accuracy is not affected by the borehole angle.
These limitations affect the Gyro only and Compass assisted gyro measuring modes.
